Fittings
We make blinds we can be proud of, down to the smallest component. We only use quality fittings and materials to ensure we deliver a superior product – every time.
Size
We custom-make all our blinds to order, ensuring the perfect fit. Visit your nearest distributor for further details.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
For installation details please download the fitting instructions above, or see your local distributor for further measure and installation details.
If installing on plaster or wallboard where possible pick up timber stud. If unable to locate stud, use a suitable wall plug or toggle for plasterboard to hold the brackets.
Face / Architrave Fit:
Spring Operated – the top edge of the brackets should be 35mm above the opening. Spring spade is always located on
the left side for under roll and on the right for over roll blinds.
Check your blinds pin measurement. This is the measurement from the end of the blind to the
other, taken from the outside of the end pins. Position the brackets in the correct position:
Chain Operated – the top edge of the brackets should be flush with the top of the architrave.
Avoid affixing screws into the angle join of the architrave. Raise or lower the brackets if necessary to avoid this.
Recess Fitting:
Side or Back fixing
Position the bracket so that the to
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
Roman Blind Styles
Orion - The Orion style has intermediate battens or sewn pockets.
Dampier - The Dampier style does NOT have intermediate battens or sewn pockets.
Click here to see Roman Blind Styles at a glance.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
Panel Blind Styles
Click here to see Panel Blind Styles at a glance.
Measure and Installation
For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.
